Section 8 Inspection Of Lighting System - ATV ATV110-M Service Manual

Section 8 Inspection of Lighting system

(II)If the taillight is out of work
1.Bulb and bulb socket
.Check if the bulb and bulb socket is correct
Meet specification
2.Voltage
.Connect the pocket tester (DC 20V)to the
terminal of taillamp.
Multimeter (+)¡úblue terminal ¢Ù
Multimeter (-)¡úblack terminal ¢Ú
.Adjust main switch to ON postion
.Adjust lamp switch to "LO"or "HI"postion
.Check the voltage of blue wire in coupler of
bulb socket(12V)
Meet specification
No failure on this circuit
No electricfication
Replace bulb and bulb socket
Out of specification
There is failure on the circuit from main switch
to bulb socket coupler. Repair it.
-85-