ATV ATV110-M Service Manual page 116

-110-
15.Crankshaft
1)Measurement
.Dimension A of crankshaft assy
If out of specification replace it or repair it
.Runout C
If out of specification replace it or repair it
Runout Limit
C1:0.03mm(0.0012 in)
C2:0.06mm(0.0024 in)
.Side clearance D of big head of connecting
rod
If out of specification, replace it or repair it
Max side clearance
0.35mm-0.65mm(0.014-0.026 in)
.Runout E of big head of connecting rod
If out of specificaition, replace it or repair it
Runout amount of big head of connecting rod
0.010-0.025mm(0.0004-0.0010 in)
.Clearance F of small end
If out of specification, replace it or repair it
Clearance of small end:
0.8mm-1.0mm(0.032-0.040 in)
Limit: 2.0mm(0.08 in)
2)Inspection:
.Crankshaft bearing
If there is some noise or not active in opera-
tion or overbig clearance, replace it.