ATV ATV110-M Service Manual page 111

.Substract the outer diameter of rocker shaft
from inner diameter of valve rocker hole to
calculate the clearance.
Clearance between rocker hole and shaft=@-
Inner diameter of valve rocker hole@
Outer diameter of rocker shaft
Replace a set if unqualified
Clearance between rocker shaft and hole:
0.009-0.037mm(0.0004-0.0031 in)
Limit:
0.037mm(0.0015 in)
9.Timing chain
Check
.Timing chain
Replace it if the chain is stretched, or not flex-
ible or broken.
10.Timing sprocket and crankshaft sproket
Check
.Crankshaft sproket (on crankshaft)
If there is wear and damaged, replace the
sproket and chain totally
11.Guide plate
1)Check
.Lower guide plate ¢Ù (exhaust side)
.Upper guide plate ¢Ú (intake side)
Replace it if it is worn or damaged
-105-