.Start the engine and accelerate to 2000r/m or so.
Charging voltage:14-15V at 2000r/m
Remark:
Use battery with full capacity
4.Resistance value for startor coil
.Take out the lighting coil of AC magneto from in-
serter
.Connect pocket multiconeter to stator coil(¦ ¸ ¡ Á 1)
Pocket multimeter(+)¡úWhite terminal
Pocket multimeter(-)¡ú White terminal
Pocket multimeter(+)¡úWhite terminal
Pocket multimeter(-)¡ú White terminal
Measure the resistance value of startor coil
At 20¡æ(68¡ãF)11.10-1.50¦¸
5.Coupling of ciucuit
.Check the whole coupling of charging wire.
Replace recticed adjuster
-82-
Oil of specification
Meet specification
Correct
Meet specification
No failure on charging circuit
Out of specification
Repalce parts of startor coil
Poor connection
Connect the charging system correctly