Starting Route Calculation - Mercedes-Benz COMAND Operating Instructions Manual

Destination input
86

Starting route calculation

The entered destination appears in the address entry menu.
To confirm Start Start
X
If you select Start Start: the route is calculated with the current route settings (
route calculation is in progress, an arrow will indicate the direction to your destination. Once
the route has been calculated, route guidance begins. If the vehicle is traveling on a non-
digitized road, the system displays the linear distance to the destination, the direction to the
destination and the
If you select Continue: alternative routes are calculated. You can display these and select Continue
them for route guidance (
If route guidance has already been activated, a prompt will appear asking whether you wish
to end the current route guidance.
To select Yes Yes
X
Yes Yes cancels the current route guidance and starts route calculation to the new destination.
Set as Intermediate Destination Set as Intermediate Destination
addition to the existing destination. The intermediate destinations menu appears
( page 94).
Y
i
The route is calculated using digital map data. The calculation time depends on the dis-
tance from the destination, for example.
The calculated route may differ from the ideal route, e.g. due to road works or incomplete
map data. Please also refer to the notes about the digital map (
Calling up the keyword search
To select the magnifying glass symbol: while in the address entry menu, slide 6, turn and
X
then press the controller.
Viewing the vicinity of the destination
To select symbol :: turn the controller and press to confirm.
X
You can explore the destination area.
or Continue: press the controller. Continue
Road Not Mapped Road Not Mapped
page 110).
Y
or Set as Intermediate Set as Intermediate Destination
message.
Destination: turn and press the controller.
adds the newly entered intermediate destination in
page 80). While
Y
page 130).
Y