Activating Wifi; Connecting Device Via Wps Pin - Mercedes-Benz COMAND Operating Instructions Manual

Activating WiFi

To select Vehicle Vehicle
X
bar: turn and press the controller.
To switch to the menu bar: slide V¬ the
X
controller.
Select System Settings System Settings.
X
The system settings menu is shown.
Select WiFi WiFi.
X
The WiFi menu appears.
Select Activate Activate.
X
Press the controller.
X
Switch the connection on O or off ª,
depending on the previous setting.
Connecting the device
General notes
i
The exact WiFi connection procedure may
vary depending on the device to be con-
nected. Follow the instructions that are
shown in the display. Further information
can be found on the operating instructions
for the device you wish to connect.
from the main function
Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
To select Vehicle Vehicle
X
bar: turn and press the controller.
To switch to the menu bar: slide V¬ the
X
controller.
Select System Settings System Settings.
X
The system settings menu is shown.
Select WiFi. WiFi
X
The WiFi menu appears.
Select Connect Via WPS Connect Via WPS PIN
X
Select the vehicle from the device to be
X
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID
WLAN XXXXX WLAN XXXXX.
The device to be connected generates a
PIN.
This PIN is also entered on COMAND.
X
Connecting the device by pressing a
button (push button)
WiFi
from the main function
PIN.
MB MB
49