Mercedes-Benz COMAND Operating Instructions Manual page 71

i Activating the cooling with air dehumidi-
fication facilitates the cooling of the vehicle
interior even with high outside tempera-
tures.
Call up the climate control menu
X
( page 68).
Y
To switch to the footer: slide 6 the con-
X
troller.
To select A/C A/C: turn and press the controller.
X
Switch cooling with air dehumidification on
X
O or off ª.
i
The current status of the cooling function
is displayed in the climate control bar: A/C
ON – activated, A/C OFF – deactivated
( page 67).
Y
i
Deactivating the cooling with air dehu-
midification function reduces fuel con-
sumption.
Synchronizing the climate control set-
tings
This setting is made in the bottom bar of the
climate control menu.
With the O O Sync Sync (synchronization) option,
you can decide whether you wish to activate
the climate control settings for all zones
together or separately.
Call up the climate control menu
X
( page 68).
Y
To switch to the footer: slide 6 the con-
X
troller.
To select O O Sync: turn and press the con- Sync
X
troller.
Switch the synchronization function on O
X
or off ª.
Climate control settings
With the synchronization function switched
off, you can alternate between driver and
front passenger.
To switch from the footer to the main area:
X
slide 5 the controller.
To switch between left and right: slide
X
1 the controller.
Not all climate control functions allow
switching between the driver and front
passenger.
Further information (see the vehicle Opera-
tor's Manual).
Rear-compartment air conditioning set-
tings
This setting is made in the bottom bar of the
climate control menu.
You can also set the rear-compartment air
conditioning from the front.
Call up the climate control menu
X
( page 68).
Y
To switch to the footer: slide V¬ the con-
X
troller.
To select Rear Rear Setting Setting: turn and press
X
the controller.
Activate the rear-compartment climate
control settings. The vehicle interior dis-
play changes accordingly.
To switch the setting back to the front
X
again: select Return to Return to Front
After a short time, COMAND automatically
switches the adjustment functions back to
the front.
69
Front.