Splitview; Transferring A Destination To The Driver - Mercedes-Benz COMAND Operating Instructions Manual

The menu called up on the driver's side is
shown.
If COMAND is switched off by removing the
key from the ignition lock while SPLITVIEW is
activated and then switched on again within
30 minutes, SPLITVIEW is activated with the
last settings.
If COMAND is switched on again after more
than 30 minutes, SPLITVIEW is not activated.
If SPLITVIEW is activated on the front-
passenger side, the settings from the driver's
side will be used.
From media mode
SPLITVIEW can be switched on from any
media mode.
Activating
From any media mode, e.g. Media Inter-
X
face: slide 6 the controller.
The menu bar is shown.
To select Options: turn and press the con- Options
X
troller.
A menu appears.
Select Start Application at Other Start Application at Other
X
Seat Seat.
A menu appears.
Select

SplitView

SplitView.
X
A window with the
SplitView... SplitView... message appears.
SPLITVIEW switches on. The ù symbol
appears in the status bar.
Starting Source Starting Source in in
Deactivating
From the driver's side, use the Ø button
X
( page 28).
Y
From the front-passenger side, use the
X
COMAND remote control.
Additional options
To select Additional Options... Additional Options...
X
menu: turn and press the controller.
A menu appears.
To switch SPLITVIEW on/off: proceed as
X
described under "Switching the rear-com-
partment displays on/off" (
Instead of selecting a rear-compartment
display, select SplitView. SplitView
To lock/unlock SPLITVIEW: proceed as
X
described under "Locking/unlocking the
rear-compartment displays" (
Instead of selecting a rear-compartment
display, select SplitView SplitView.
Transferring a destination to the
driver
Using SPLITVIEW you can select a destination
from the front-passenger side and transfer
this to the driver's side.
Switch on SPLITVIEW (
X
To select ICON_SplitView On On ICON_SplitView
X
bar: turn and press the controller.
The SPLITVIEW symbol appears in the dis-
play and the ù display switches to
Select ® in the main function bar with the
X
COMAND remote control.
A menu appears.
Using the COMAND remote control, select
X
Mercedes-Benz Mercedes-Benz Apps Apps.
You see the selection of Mercedes-Benz
Apps.
Select Google Local Search Google Local Search
X
COMAND remote control (
A menu appears.
Select a search position, e.g.
X
Vicinity of the Destination Vicinity of the
A menu appears.
SPLITVIEW
in the
page 72).
Y
page 72).
Y
page 28).
Y
in the menu
Off. Off
with the
page 179).
Y
In the In the
Destination.
29