Mercedes-Benz COMAND Operating Instructions Manual page 276

Comand system
Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

Audio/video mode
274
Depending on the vehicle model and equip-
ment level, the CD/DVD drive is found:
at the rear of the center console under the
R
automatic climate control panel or
between the parcel shelf and skibag.
R
The CD/DVD drive is a single disc drive. If
there is already a disc inserted, this must be
ejected before another is inserted.
Insert a disc into the disc slot.
X
The printed side of the disc must face
upwards. If neither side of the disc is
printed, the side you wish to play must face
downwards.
The CD/DVD drive draws in the disc.
The CD/DVD drive plays the disc:
if it has been inserted correctly and is a
R
permissible disc, and
once you have activated disc mode.
R
Data on an MP3 CD first needs to be loaded by
the drive. Loading may take some time,
depending on the number of folders and
tracks.
Switching to audio/video mode
Insert a CD/DVD (
X
The system loads the inserted disc and
starts playback.
or
Select
Media
Media
X
buttons on the remote control and press
the 9 button to confirm.
Select
Disc
Disc
using the =; buttons
X
and press the 9 button to confirm.
The system plays the disc.
To switch to other media: insert the
X
device into the corresponding jack.
The system searches for files on the device
that can be played back, and then plays
them.
page 264).
Y
using the 9=;
Selecting a track
Selecting by skipping to a track
To skip forwards or backwards to a
X
track: press the = or ; button on
the remote control.
or
Press the E or F button.
X
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track. If the elapsed time is
shorter, it will skip to the start of the pre-
vious track.
If the
Random Tracks
Random Tracks
playback option has been selected, the
track order is random.
Selecting by track list
In audio CD mode, the track list contains all
tracks on the disc currently playing.
In MP3 mode, the track list shows all tracks in
the currently active folder as well as the folder
structure, allowing you to select any track on
the MP3 CD.
Select
Search
Search
using the :=;
X
buttons on the remote control and press
the 9 button to confirm.
Select
Current Tracklist
Current Tracklist
X
9: buttons and press the 9 button
to confirm.
The track list appears. The # dot indicates
the current track.
Select the track using the 9: but-
X
tons and press the 9 button to confirm.
Making a selection by entering the track
number directly
This function is only available in Media mode.
Press the h button on the remote
X
control.
The track entry display appears.
or
Random Folder
Random Folder
using the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents