Handwriting Recognition - Mercedes-Benz COMAND Operating Instructions Manual

Use one finger to draw the desired charac-
X
ter on the touch-sensitive surface.
The character recognized is entered in the
input line. You can draw the next character
on the touch-sensitive surface.
If the character can be interpreted in different
ways, these options are displayed.
More information on the character sugges-
tions ( page 33).
Y
Character suggestions
Character recognized
:
Character suggestions
;
To select a character suggestion: turn the
X
controller.
The selected character is entered instead
of the automatically recognized character.
Character entry can be continued.
Entering a space
Prerequisite: an input line for text, numbers or
characters has been selected.
Use your finger to touch the touch-sensi-
X
tive surface and glide to the right.
A space is entered into the input line.
Deleting characters
Prerequisite: an input line for text, numbers or
characters has been selected.
Use your finger to touch the touch-sensi-
X
tive surface and glide to the left.
The character last entered is deleted.
Switching input line
Press the touchpad.
X
A symbol is shown.
To select p: glide your finger to the left
X
or right and press.
To select the desired input line: glide up or
X
down and press.
The selected input line is active and char-
acter entry can be continued.
Moving the cursor within the input line
Press the touchpad.
X
A symbol is shown.
To select p: glide your finger to the left
X
or right and press.
To move the cursor: glide to the left or right.
X
Changing the input language for hand-
writing recognition
Prerequisite: an input line for text, numbers or
characters has been selected.
Touchpad
33