Character Entry (Telephony); Entering Characters - Mercedes-Benz COMAND Operating Instructions Manual

Character entry (telephony)

36
MEDIUM
Media Register
Media Interface 1
Media Interface 2
Bluetooth Audio
TV
Accessing media in the vehicle
To show the menu: press the : button
X
on the remote control.
Using the :=; buttons on the
X
remote control, select
The discs/devices available are shown. The
# dot indicates the current setting.
Select the device/disc using the :9
X
buttons and press the 9 button to confirm.
If the device/disc contains music or video
files, these will be played.
Further information on media in the rear com-
partment ( page 261).
Y
Function/location
Media found in the
MEDIA REGISTER.
Devices connected
to USB ports 1 and
2. USB ports 1 and 2
are located under
the center console
armrest in the rear
compartment.
Devices connected
with COMAND via
®
Bluetooth .
Television
Devices. Devices
Character entry (telephony)
Writing a text message is used as an example.
Further information on writing a text message
( page 158).
Y

Entering characters:

Turn and press the controller.
X
The character selected in character bar ;
is entered into telephone number input
line :.
Deleting characters:
To switch to the bottom line of the charac-
X
ter bar: slide VÆ the controller.
To select F: turn and press the controller.
X
The character last entered is deleted.
Switching input line:
To switch to the bottom line of the charac-
X
ter bar: slide VÆ the controller.
To select 5: turn and press the controller.
X
or
Slide ZV the controller repeatedly until the
X
character bar disappears.
To select an input line for the text of the text
X
message: slide VÆ and press the control-
ler.
The input line for the text of the text mes-
sage is selected. The character bar has
been adapted for entering text.