Mercedes-Benz COMAND Operating Instructions Manual page 142

Connecting/disconnecting a mobile phone
140
Symbols in the device list
Sym- Explanation
bol
Ï New mobile phone found, not yet
authorized.
Ñ Mobile phone is authorized, but is
not connected.
#
Mobile phone is authorized and
connected.
Authorizing a mobile phone (connect-
ing)
Authorization via Secure Simple Pairing
If COMAND has found your mobile phone, you
can authorize (connect) it.
To select a mobile phone from the device
X
list: turn the controller and press to con-
firm.
A code is displayed in COMAND and on the
mobile phone.
The code is the same
COMAND: select
X
Mobile phone: confirm the code. Depend-
X
ing on the mobile phone used, you may
have to confirm the connection to
COMAND and for the PBAP and MAP Blue-
®
tooth profiles. The prompt to confirm may
take up to two minutes to be displayed. You
may also save the confirmation on the
mobile phone (see the manufacturer's
operating instructions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
To ensure an optimum language quality, you
can set the mobile phone's transmission and
reception volume (
Yes Yes.
page 142).
Y
The code is different
COMAND: select No No.
X
The process is canceled. Repeat the
authorization.
Authorization via passkey entry (access
code)
If COMAND has found your mobile phone, you
can authorize (connect) it.
To select a mobile phone from the device
X
list: turn the controller and press to con-
firm.
The input menu for the passkey is dis-
played.
The passkey is a one- to sixteen-digit num-
ber combination which you can choose
yourself.
COMAND: enter the passkey using the
X
character bar.
Select ¬ once all the numbers have
X
been entered.
Mobile phone: enter the same passkey
X
and confirm your entry. Depending on the
mobile phone used, you may have to con-
firm the connection to COMAND and for the
PBAP and MAP Bluetooth
prompt to confirm may take up to two
minutes to be displayed. You may also save
the confirmation on the mobile phone (see
the manufacturer's operating instructions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
To ensure an optimum language quality, you
can set the mobile phone's transmission and
reception volume (
Y
If the Authorization Failed Authorization Failed
appears, you may have entered a different
passkey or exceeded the prescribed time
limit. Repeat the procedure.
i
Some mobile phones require a passkey
with four or more digits.
®
profiles. The
page 142).
message