Mercedes-Benz COMAND Operating Instructions Manual page 232

Bluetooth
230
Option 2: Secure Simple Pairing
i
The Bluetooth
port Bluetooth
via Secure Simple Pairing. COMAND cre-
ates a six-digit code, which is displayed on
both devices that are to be connected
For some Bluetooth
pairing must be confirmed within 10 sec-
onds.
If the number code displayed on COMAND
X
and on the Bluetooth
same, select
If you select
and the Bluetooth
nected. Playback starts.
If you select
External authorization
If COMAND does not find your Bluetooth
audio device, this may be due to particular
security settings on your Bluetooth
device. In this case, check whether your Blue-
®
tooth audio device can locate COMAND.
®
The Bluetooth
MB MB Bluetooth Bluetooth.
Switch on Bluetooth
X
( page 232).
Y
To select Options Options: slide V¬ and press
X
the controller.
To select Bluetooth Audio Bluetooth Audio Devices
X
press the controller.
To select Connect via Audio Connect via Audio Device
X
turn and press the controller.
®
audio mode
®
audio device must sup-
®
version 2.1 for connection
®
audio devices, the
®
audio device is the
Yes: press the controller. Yes
Yes, authorization continues Yes
®
audio device is con-
No No, authorization is canceled.
®
device name for COMAND is
®
audio mode
Devices:
Device:
Authorizing
Start the authorization on the Bluetooth
X
audio device; see the operating instruc-
tions of the Bluetooth
After successful authorization, the Blue-
®
tooth audio device is connected and
starts playing.
With some Bluetooth
back must first be started on the device itself
so that COMAND can play the audio files.
Reconnecting a Bluetooth
device
The Bluetooth
automatically under the following circum-
stances:
one of the last two mobile phones to have
R
been connected has also been used as a
Bluetooth
®
supported by the mobile phone).
audio the mobile phone is automatically con-
R
nected. The Bluetooth
connected.
i
For an automatic connection with
COMAND, the telephone must be within
range.
For most Bluetooth
"automatic connection" must be activated
by checking a box. Depending on the
device used, this prompt often takes place
when authorizing (see the Bluetooth
device operating instructions).
If the No Bluetooth Audio Device Con‐ No Bluetooth Audio Device Con‐
nected nected message appears, you have two
options to reconnect the Bluetooth
device.
Option 1:
Connect Device Connect Device
X
press the controller.
If COMAND can locate the Bluetooth
audio device, it will be connected and will
start playing.
®
audio device.
®
audio devices, play-
®
audio
®
audio profiles are connected
®
audio player (if this function is
®
audio player is then
®
audio devices, the
in the basic display:
®
®
audio
®
audio
®