Service Menu - Mercedes-Benz 2013 S-Class Operator's Manual

Activating/deactivating Blind Spot
Assist
You can use the Blind Spot Assist
function to activate or deactivate Blind Spot
Assist ( page 363) or Active Blind Spot
Y
Assist ( page 367).
Y
Press the = or ; button on the
X
steering wheel to select the
menu.
Press 9 or : to select
X
Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
Activating/deactivating Lane Keeping
Assist
You can use the Lane Keeping Assist
function to activate/deactivate Lane Keeping
Assist ( page 365) or Active Lane Keeping
Y
Assist ( page 369).
Y
Press the = or ; button on the
X
steering wheel to select the
menu.
Press 9 or : to select
X
Keeping Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the à symbol
appears in the multifunction display when the
ignition is on.

Service menu

In the Service menu, you have the following
options:
calling up display messages (
R
checking the tire pressure electronically
R
( page 505)
Y
calling up a service due date
R
( page 469)
Y
checking the oil level (
R
Settings menu
Introduction
DriveAssist
The Settings
Switching the daytime running lamps on/
R
Blind Spot
off
switching Adaptive Highbeam Assist on/
R
off
showing or hiding the additional
R
speedometer
selecting the units for speed and distance
R
switching the belt adjustment on/off
R
activating/deactivating the radar sensor
R
system
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the
DriveAssist
lights
$ or c position, the daytime running
Lane
lamps are automatically switched on when
the engine is running.
Depending on the ambient light, the following
will additionally light up:
parking lamps
R
tail lamps
R
license plate lamp
R
side marker lamps
R
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to L or c.
The factory setting is On.
page 390)
Y
Menus and submenus
page 463)
Y
menu can be used for:
Daytime running
function and the light switch is in the
387
Z