Multiple Users - Mercedes-Benz 2013 S-Class Operator's Manual

To set operation via the main
X
loudspeakers: press the R function
button on the center console once or twice.
Select Audio by sliding ZV the COMAND
X
controller and press W to confirm.
The Audio menu appears.
Select Rear by turning cVd the COMAND
X
controller and press W to confirm.
i
The headphones' volume setting does not
affect the main loudspeakers.
Adjusting the sound settings
You can select the sound settings in the audio
CD/DVD/MP3, video DVD and AUX modes.
Switch on an audio operating mode (e.g.
X
audio CD mode).
Select Treble or Bass
X
the :=; buttons on the remote
control and press the 9 button to confirm.
An adjustment scale appears.
Select a setting using the 9:
X
buttons and press the 9 button to confirm.

Multiple users

Simultaneous use of the rear-
compartment disc drive
The two rear-compartment screens can be
operated almost entirely independently from
one another. However, there can be a conflict
in some menus if the two screens are used
simultaneously.
If the rear-compartment disc drive is being
used for both screens simultaneously,
selecting certain menus or settings on one of
the screens also affects the other screen.
The following functions affect both screens:
changing playback options
R
selecting a track (from a track list or folder)
R
using the play, pause and stop functions
R
fast forwarding/rewinding or scrolling
R
calling up the DVD menu and navigating
R
within it
Rear Seat Entertainment System
setting the language, subtitles and camera
R
angle
calling up interactive DVD content
R
The following functions affect only one
screen:
audio and video functions as well as picture
R
settings
switching between full screen and the
R
menu
Switching between operating modes
When you exit an operating mode (e.g. audio
CD mode), the current setting is saved. If you
call up this operating mode again later, there
are two possibilities:
the operating mode has been changed on
R
the other screen.
the operating mode has not been changed.
R
using
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
Picture settings
Overview
You can select these settings in video DVD
and AUX mode. Instructions for AUX mode
are detailed later (
Adjusting the brightness, contrast and
color
Switch on video DVD mode (
X
To show the menu: press the 9 button
X
on the remote control.
or
Select
X
(
button to confirm.
In both cases, select
X
the :=; buttons and press the
9 button to confirm.
page 263).
Y
Menu while the navigation menu
page 246) is shown and press the 9
Y
Video DVD
253
page 246).
Y
using
Z