Resetting - Mercedes-Benz 2013 S-Class Operator's Manual

Sliding sunroof
102
being injured by the opening or closing
procedure.
The rear roller sunblind is equipped with
automatic operation and the anti-entrapment
feature. If the movement of the rear roller
sunblind is blocked during the closing
procedure, the rear roller sunblind will stop
and retract slightly.
The opening or closing of the rear roller
sunblind can be immediately halted by
releasing the sunblind switch or, if the
sunblind switch was moved past the
resistance point and released, by pressing or
pulling the sunblind switch again.
Door control panel in rear
To open/close manually: press or pull
X
switch : to the point of resistance and
hold it until the rear roller sunblind has
reached the desired position.
To open/close fully: press or pull
X
switch : beyond the point of resistance
and release it.
i
You can stop automatic operation by
operating the switch again.
Resetting the panorama roof with
power tilt/sliding panel or the front
roller sunblind
Reset the panorama roof with power tilt/
sliding panel or the front roller sunblind if the
panorama roof with power tilt/sliding panel
or the roller sunblinds do not move smoothly.
! Do not open the panorama roof with
power tilt/sliding panel until it has been
reset correctly. The panorama roof with
power tilt/sliding panel can otherwise be
locked in the open position.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Pull the 3 switch repeatedly to the point
X
of resistance in the direction of arrow
=( page 100) until the panorama roof
Y
with power tilt/sliding panel is fully closed.
Keep the 3 switch pulled for an
X
additional second.
Pull the 3 switch in the direction of
X
arrow =( page 101) repeatedly until the
Y
front roller sunblind is closed.
Keep the 3 switch pulled for an
X
additional second.
Make sure that the panorama roof with
X
power tilt/sliding panel (
the front roller sunblind (
be fully opened again.
If this is not the case, repeat the steps
X
above again.
Resetting the rear sunblind
Door control panel in rear
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Pull switch : repeatedly until the rear
X
roller sunblind is fully closed.
Keep switch : pulled for an additional
X
second.
page 100) and
Y
page 101) can
Y