Saving - Mercedes-Benz 2013 S-Class Operator's Manual

Navigation
184
Select a destination by turning cVd the
X
COMAND controller and press W to
confirm.
The destination address is shown.
Select Save and press W to confirm.
X
You can now select storage options.
Selecting storing options
To save the destination without a
X
name: select Save without Name
press W to confirm.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
To save the destination as My address:
X
select Save as "My Address"
W to confirm.
COMAND stores the destination in the
destination memory as
entry already contains navigable data
(symbol L), a prompt appears asking you
whether the entry should be overwritten.
Select Yes or No
X
If you select Yes, the entry is overwritten.
If you select No, the process will be aborted.
To save the destination with a name:
X
select Save with Name
confirm.
Select a category, e.g. Home, and press W
X
to confirm.
The input menu appears with data fields
and the character bar.
and
and press
My Address. If the
and press W to confirm.
and press W to
Example display: saving a destination with a name
Selected data field with cursor
:
Character bar
;
Proceed as described under "Entering
X
characters using the character bar" in the
"Entering characters in navigation mode
(entering a city)" section (
Then, select ¬ and press W to confirm.
X
COMAND stores the destination under the
name entered.
Assigning a destination to an address
book entry
An address with complete address data that
is suitable for navigation can be assigned to
a pre-existing address book entry. You can
then later start route guidance to this address
straight from the address book
( page 212).
Y
Select Assign Address Book Entry
X
press W to confirm.
Select a category, e.g. Home, and press W
X
to confirm.
You will see the address book either with
the character bar or as a selection list.
To select an address book entry:
X
proceed as described in the "Searching for
an address book entry" section
( page 209).
Y
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
page 157).
Y
and