Mercedes-Benz 2013 S-Class Operator's Manual page 206

Telephone
204
To reject: select
X
the COMAND controller and press W to
confirm.
or
Press the ~ button on the telephone
X
keypad or on the multifunction steering
wheel.
To accept: confirm
X
W.
or
Press the 6 button on the telephone
X
keypad.
or
Press the 6 or ? button on the
X
multifunction steering wheel.
Once you have accepted the call, you can use
hands-free mode. The call volume can be
adjusted ( page 138). For more information,
Y
see the "Functions available during a call"
section ( page 205).
Y
The display shows the phone number or the
name and phone number (if the entry is stored
in the address book) or shows the
(phone number withheld) message.
i
You can also accept a call as described
above when COMAND is showing the
display of a different main application. The
display switches to the telephone display
after a call is accepted using the COMAND
controller or the telephone keypad. After
the call is finished, you see the display of
the previous main application again.
Reject by turning cVd
Accept by pressing
Unknown
Making a call
Entering a telephone number using the
telephone keypad
Call up the telephone basic menu
X
( page 202).
Y
Enter all the digits of the phone number
X
using the telephone keypad.
To make a call: press the 6 button on
X
the telephone keypad or on the
multifunction steering wheel.
Entering a telephone number using the
telephone basic menu
Call up the telephone basic menu
X
( page 202).
Y
Select the digits one by one by turning
X
cVd and sliding ZVÆ the COMAND
controller and press W to confirm.
To make a call: select
X
telephone basic menu and press W to
confirm.
or
Press the 6 button on the telephone
X
keypad or on the multifunction steering
wheel.
Redialing
Call up the telephone basic menu
X
( page 202).
Y
Press the 6 button on the telephone
X
keypad.
or
Select SEND from the telephone basic menu
X
and press W to confirm.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
To select a call: select an entry by turning
X
cVd the COMAND controller and press
W to confirm.
SEND from the