Setting The Text Reader Speed - Mercedes-Benz 2013 S-Class Operator's Manual

Select Time Zone and press W to confirm.
X
You will see a list of time zones. The # dot
indicates the current setting.
Select the time zone and press W to
X
confirm.
To switch automatic changeover on/
X
off: select Automatic Daylight
Savings Time or Automatic Daylight
Savings Time by turning cVd the
COMAND controller and press W to
confirm.
The # dot indicates the current setting.
Text reader settings

Setting the text reader speed

Select Vehicle by turning cVd the
X
COMAND controller and press W to
confirm.
Select System and press W to confirm.
X
Select Text Reader and press W to
X
confirm.
Select Set text reader speed
X
W to confirm.
A list appears. The # dot indicates the
current setting.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
Voice Control System settings
Opening/closing the help window
In addition to the audible instructions, the
help window will show you other information
during voice control operation and the
individualization process.
Select Vehicle
X
turning cVd the COMAND controller and
press W to confirm.
Select System
X
COMAND controller and press W to
confirm.
Select Voice Control
X
COMAND controller and press W to
confirm.
Select Help Window
X
confirm.
You have switched the help window on
O or off ª.
and press
Individualization
Introduction
You can use the individualization function to
fine tune the Voice Control System to your
voice and therefore improve voice
recognition. This means that other users'
voices will not be recognized as easily. For
this reason this function can be switched off.
Individualization comprises two parts and
takes approximately 5 minutes. It consists of
training the system to recognize a certain
number of digit sequences and voice
commands.
Starting new individualization
Individualization can only be started when the
vehicle is stationary. Before starting, switch
off all devices or functions which could
interfere, such as the radio or the navigation
system. After starting the session, the system
System settings
in the main function bar by
by turning cVd the
by turning cVd the
and press W to
149
Z