Checking The Oil Level Using The On-Board Computer - Mercedes-Benz 2013 S-Class Operator's Manual

Engine compartment
464
consumption may be higher than this when
the vehicle is new or if you frequently drive at
high engine speeds.
On vehicles with a 12-cylinder engine, the oil
level can be checked using the on-board
computer. On all other models, the oil
dipstick must be used to check the engine oil
level.
Depending on the engine, the oil dipstick may
be in a different location.
When checking the oil level:
park the vehicle on a level surface.
R
the engine should be switched off for
R
approximately five minutes if the engine is
at normal operating temperature.
if the engine is not at normal operating
R
temperature, e.g. if the engine was only
started briefly: wait about 30 minutes
before carrying out the measurement.
Checking the oil level using the oil
dipstick
Example: vehicles with a gasoline engine
Example: vehicles with 4MATIC
Pull oil dipstick : out of the dipstick guide
X
tube.
Wipe off oil dipstick :.
X
Slowly slide oil dipstick : into the guide
X
tube to the stop, and take it out again.
If the level is between MIN mark = and
MAX mark ;, the oil level is correct.
If the oil level has dropped to MIN mark
X
= or below, add 1.1 US qt (1.0 liter) of
engine oil.
Checking the oil level using the on-
board computer
Measurement
Make sure that the SmartKey is in position
X
2 in the ignition lock.
Press the ; or = button to select the
X
Service menu.