Remote Control - Mercedes-Benz 2013 S-Class Operator's Manual

Cleaning instructions
! Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a soft, lint-free
cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a
commercially available microfiber cloth and
cleaning agent for TFT/LCD displays. Then,
dry the surface with a dry microfiber cloth.
Avoid using alcoholic thinners, gasoline or
abrasive cleaning agents. These could
damage the display surface. Do not apply
pressure to the display surface when cleaning
it, as this could cause irreversible damage.

Remote control

Overview
You can use the remote control to operate the
COMAND display, SPLITVIEW and either one
of the rear-compartment screens.
To switch the screen on/off (Rear Seat
:
Entertainment System only)
To switch the button lighting on/off
;
To select the screen for remote control
=
operation (COMAND, SPLITVIEW, L
REAR and REAR R can be selected)
To select a menu or menu item
?
To confirm a selection or setting
A
Mute
B
To adjust the volume (for corded
C
headphones only)
COMAND: to set the station, skip track,
D
fast forward/rewind, for example. Rear
Seat Entertainment System: skip track,
fast forward/rewind
COMAND: to select a station from
E
presets, select a track, enter directly,
enter a phone number, for example. Rear
Seat Entertainment System: to select a
track, enter directly
To exit a menu (back)
F
Point the remote control at the
X
corresponding screen and execute the
functions by pressing the corresponding
buttons.
i
The remote control's function may be
restricted depending on the angle at which
it is pointed at the respective screen.
Selecting the screen for the remote
control
Turn thumbwheel = until the desired
X
display is highlighted in the window.
Switching the screen on/off (Rear Seat
Entertainment System only)
If the SmartKey is in the ignition lock in
position 0 or 1 or if the SmartKey is not in the
ignition lock, the rear screens will switch off
after 30 minutes. Before the screens switch
off, they show a message to this effect.
You can switch the screens back on.
However, this will discharge the starter
battery.
At a glance
129
Z