Britax Safe-nSound Instructions For Installation And Use Manual page 50

ACCESSORIES
INSERT PAD -
The insert pad is designed to snugly support baby for extra support
and comfort and should be used for small babies when rearward
facing. Discontinue use when the insert pad is tight fit or creates
discomfort for larger babies or when the child's shoulder's reach the
lower shoulder height marker. Do not use when in forward facing
mode. Fit as follows:-
A. Disconnect buckle and place insert under shoulder and lap straps.
B. Feed the crotch strap through the flap in the insert pad and
re-connect buckle.
CUP HOLDER (IF SUPPLIED)
To fit the cup holder to the restraint, insert
the locating tabs through the pair of holes
on either side of the restraint. Slide the cup
holder down until it locks into position. To
remove, press the release trigger on the
bottom of the cup holder, then slide up and
out of the holes in the restraint. Ensure
the cup holder and its contents can not
be crushed by the car door. Store the cup
holder when not in use.
WARNING:
Only use for holding cups, bottles and drink cartons.
Do not use for hot drinks.
50
STYLE MAY VARY
Insert
Pad
Pull crotch strap through
flap in Insert Pad.
Slide cup holder into the
slots and then down, until
it locks into position
Release trigger