Britax Safe-nSound Instructions For Installation And Use Manual page 45

COVER (STYLE MAY VARY)
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on
the care label attached to the cover. If fluffy cover is fitted then washing cover prior to use will remove
excess fluff.
Drying the insert pad will take additional time as the impact foam will absorb moisture. Before washing
re-engage the hook and loop on the cover and inset pad to prevent the 'hook' damaging the fabric.
The cover has been designed to protect your child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food or drink products may cause damage or
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
VERY IMPORTANT:
Only use this child restraint with the cover supplied or a
manufacturer-authorised replacement cover with identical
shoulder height markers.
TO REMOVE COVER:
NOTE: There is no need to disconnect the shoulder harness
assembly straps from restraint.
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
C. Remove any accessories, insert pad, crotch pad and shoulder
pads (if fitted).
CARE & MAINTENANCE
45