Britax Safe-nSound Instructions For Installation And Use Manual page 33

ADJUSTING HASSLE FREE HARNESS™ SHOULDER STRAP HEIGHT &
HEADREST: FOR FORWARD FACING USE
Correct fitment of the harness is very important as it restrains the child in the restraint. The harness
must fit firmly around the upper torso of the child and be positioned so as to leave the child's arms and
legs free.
With the headrest adjusted so that the bottom edges are just above the child's shoulders the harness
will then fit closely to the child's shoulders. If the headrest is in the top position and the shoulders
are above the upper shoulder height marker then the child is too tall for the restraint and the restraint
should not be used; move to next type of restraint (see pages 6 to 8).
Lower Shoulder Height Marker
The shoulder strap slots must be positioned nearest to the child's shoulders, but not more than
25mm below the child's shoulders. There is only one set of slots so the seat will always have the
shoulder straps in place once the headrest is positioned correctly, just above the child's shoulders.
NOTE: This child restraint does not require the straps to be disconnected to adjust their height, only
the headrest needs to be moved to adjust the shoulder strap position.
Harness Shoulder Slots
Shoulder Harness Straps
Harness Tongues
And Buckle
Lap Strap Slots
Crotch Strap Slots
Harness Adjuster Lever
Harness Adjuster Strap
HOW TO SETUP
25mm
33