Britax Safe-nSound Instructions For Installation And Use Manual page 51

MESSY MAT™ (IF SUPPLIED)
The Messy Mat has been specifically designed to protect your
vehicle seat from damage by the child restraint and children's
shoes rubbing against it. If the Messy Mat has been supplied it
must be used to protect the car upholstery.
Place pocket on edge of seat, smooth back toward seat join ('A')
and fit in any excess Messy Mat into the join of the car seat ('A').
CAUTION:
The Messy Mat™ pocket is only for small, light
items. DO NOT overload the pocket with heavy,
bulky items as this may damage the pocket or cause
passengers to trip over them.
EZ BUCKLE SYSTEM (WHERE FITTED)
EZ Buckle system retains the harness buckle in a forward position
and prevents the child from sitting on the buckle when boarding.
Aids in opening harness and placing child in the seat.
A. Feed EZ Buckle system though slot in front of crotch buckle slot
B. Feed Crotch buckle through slot in EZ Buckle system as shown.
Ensure that the EZ Buckle system is behind the buckle- i.e.
the buckle is in front.
A
ACCESSORIES
Note: Some Messy Mats
may not have pockets.
B
Long Messy Mat
(If fitted)
A
Pocket
Short Messy Mat
(If fitted)
A
Pocket
51