Britax Safe-nSound Instructions For Installation And Use Manual page 17

B. Lift the flap at the end of the seat to
access the stabilising bar, pull out
stabilising bar and then gently push bar
forward until you hear a click. Stabilising
bar is now latched in place. Refit the
cover.
C. Position restraint rearward facing in the
chosen seating position.
D. Undo the buckle and place buckle
tongues in the Harness Tongue Holders
on each side of the cover.
HOW TO INSTALL
B B C
Then push bar
forward
B C
B D
Lift cover
enough to
access the
stabilising bar
Click
Pull out
stabilising
bar
Harness
Tongue
Holders
17