Britax Safe-nSound Instructions For Installation And Use Manual page 36

HOW TO INSTALL
INSTALLING INTO VEHICLE FORWARD FACING
(UPRIGHT OR RECLINED)
A. Remove the seat from the vehicle by
disengaging the seatbelt and upper
anchorage strap.
B. Remove the insert pad (if fitted) as
this is no longer required.
C. To store the stabilising bar, lift the
cover at the end of the seat which
uncovers the stabilising bar storage
recess.
D. Press the button on the left side
(facing seat) and gently push
stabilising bar back and then down
into the recessed area.
E. Re-attach the cover at the end of
the seat.
IMPORTANT :
DO NOT USE RESTRAINT IN FORWARD-FACING POSITION WITH THE STABILISING
BAR PULLED OUT.
Do not recline into rearward facing position when using restraint in forward facing
mode.
Ensure harness and headrest are in the correct position (Refer to page 33).
36
Hook and Loop
attachment
Stabilising
bar
Rotate
backwards
Button under trim
Then push
inwards