Britax Safe-nSound Instructions For Installation And Use Manual page 47

F. Remove the cover by unclipping any press studs
or hook and loops.
G. Feed crotch buckle, crotch strap slot in the cover and
feed the shoulder harness behind the centre flap.
TO REPLACE COVER:
A. Feed the harness tongues and shoulder straps through the
side slots in the cover.
B. Stretch the cover over the top of the restraint first, then the
sides, then stretch the cover around the rim of the restraint.
Attach the elastic loops at the top of the cover located at the
back of the restraint and the elastic loops at the bottom of
the restraint located under the front of the restraint. Re-attach
and press studs or hook and loops together. Feed the crotch
buckle through slot in cover.
CARE & MAINTENANCE
Unclip the press
studs
Crotch
slot
Hook elastic loop at the back
of the restraint
Peel away the
hook and loop
F F
G
B
47