Audio1 Gain And Audio2 Gain Menus - Motorola DSR-4550 Operator's Manual

3

Audio1 Gain and Audio2 Gain Menus

Mode Field
Left and Right Fields
26
These menus allow adjustment of the audio signal output level from 0 to -20dB in
1dB increments. Press the  buttons until the AUDIO1 GAIN or AUDIO2
GAIN menu appears.
AUDIO1 GAIN Mode
E
AUDIO2 GAIN Mode
E
The user may adjust the output levels of the left and right channels jointly. The
output level of the right channel tracks the setting for the left channel when the
output levels are adjusted jointly.
The Mode field allows the user to select the mode by which the user adjusts the
Audio Gain port. Press the 4 button until the cursor is at the Mode label, and press
the ENTER button to move into the field. Press the  buttons to view the two
options:
• Independent: Each channel is set up and controlled independently.
• Joint: Both channels are configured jointly using the Left field settings as the
control for both audio channels.
Press the ENTER button to select the option shown and exit the field.
Note: The Right field is not editable when the Joint option is set for the Mode field.
The Left and Right fields allow adjustment of the output level of the Left and Right
audio signals. Press the 4 button until the cursor is at the desired label, and press
the ENTER button to move into the field.
When Independent option is selected, use the  buttons to simultaneously adjust
the output level for the left and right audio signals.
Press the ENTER button to confirm the selections.
Left Right
Joint +00 +00
Left
Right
Joint +00 +00
Default: Joint
Default: 0