Motorola DSR-4550 Operator's Manual page 33

ID Field
Use this field to choose which L-band port to configure. Press the 4 button until
the cursor is at the ID field, then use the  buttons to choose a port number
(1-8). Press the ENTER button to select and exit the field.
Mode Field
Use the Mode field to select the mode for port setup, either Manual or Auto. Press
the 4 button until the cursor is at the Mode label, and press the ENTER button to
move into the field. Press the  buttons to view the desired mode and press the
ENTER button to select the mode and exit.
Satellite Field
Note: This field displays the satellite to which the port is related and is not
editable when the Auto option is selected in the Mode field. This field displays
dashes (---) when the port is not related to a satellite.
The Satellite field defines the abbreviated name (two or three alphanumeric
characters) for the satellite to which the selected port is associated when the
Manual mode is selected. The Satellite field is a user-configurable parameter which
the unit may overwrite depending on information received in download tables.
Press the 4 button until the cursor is at the Satellite label. Press the ENTER button
to enter this field, use the 4 buttons to select the character position to be
changed. Then use the  buttons to scroll through the character choices. Press
the ENTER button to select a character in each character position. When complete,
press the ENTER button again to confirm the name and exit the field.
Polar Field
Use this field to select a polarity when the Manual option in the Mode field is
selected. Press the 4 button until the cursor is at the Polarity label. Press the
ENTER button to enter this field and press the  buttons to display the options:
•
•
Select a polarity and press ENTER to exit the field.
DSR-4550
H/LHP (Horizontal/Left-Hand Polarity)
V/RHP (Vertical/Right-Hand Polarity)
Default: 1
Default: Auto
Default: ---
Default: ---
Operating the DSR-4550
23