Motorola DSR-4550 Operator's Manual page 70

3
Field Field
Line Field
60
Note: The IRD does not display this field when the waveform is set to Transmitted
or Disabled.
The Field field allows the user to select the field on which the VITS is reinserted by
the receiver. Press the 4 button until the cursor is at the Field label, and press the
ENTER button to move into the field. Press the  buttons to select the desired
option (Field 1 or Field 2) and press the ENTER button to confirm the selection and
exit the field.
Note: The IRD does not display this field when the waveform is set to Transmitted
or Disabled.
Press the 4 button until the cursor is at the Line label, and press the ENTER button
to move into the field. Press the  buttons to display the options (17 or 18).
Press the ENTER button to confirm the selection and exit the field.
Default: 1
Default: 17