Paper Selection; Automatic Paper Selection - Canon Image Runner 2000 Series Manual

Paper Selection

This mode enables you to set the machine to automatically select the paper size, or
to manually specify a paper size for a copy job.
NOTE
• If you are copying an original onto the same size paper at a copy ratio of 100%, the
periphery of the original image may be cut slightly on the copy. For details of the size of
the nonimage areas, see the Reference Guide.
• For instructions on loading paper into the stack bypass, see the Reference Guide.

Automatic Paper Selection

The machine automatically selects the copy paper.
IMPORTANT
You cannot use the Automatic Paper Selection mode when copying the following types of
originals. Copy these originals using the Manual Paper Selection mode.
- Nonstandard size originals
- Highly transparent originals such as transparencies
- Originals with an extremely dark background
- Originals smaller than STMT
NOTE
• The default setting is 'AUTO PAPER'.
• You can set whether to activate or deactivate the Automatic Paper Selection for each
paper drawer and the stack bypass. (See the Reference Guide.)
• You can use the stack bypass for the Automatic Paper Selection when:
- The paper is set on the stack bypass
- The paper size, is specified in <3.USE STACK BYPASS> in the <1.COMMON
SETTINGS> menu
- The Auto Paper Selection is set to 'ON' for the stack bypass in the <3.DRAWER
ELIGIBLTY> menu

Paper Selection

1-19
1