Canceling a Job
You can cancel a job in several ways.
Canceling with [Stop]
1
Stop
Press [Stop].
G
If you press [Stop] during scanning
I Press [OK].
The scanning stops and the job will be canceled.
NOTE
If you press [Stop] during scanning when copying from the optional feeder, the
original may stop inside the feeder. In such a case, remove the original from inside
the feeder following the procedure described in "Clearing Paper Jams in the
Feeder," on p. 7-4 in the Reference Guide.
G
If there is only one job which is being printed
I Press [
If you do not want to cancel the job, press [
] to select 'YES'.
].
Canceling a Job
1
1-15