Orientation - Canon Image Runner 2000 Series Manual

Orientation

You can place original either vertically or horizontally. Always align the top edge of
your original with the back edge of the platen glass (by the arrow in the top left
corner), or with the back edge of the feeder.
1
Staple copy: place the original face up
Copies are stapled here.
IMPORTANT
The copies are stapled at the part equivalent to the upper left side of the original.
NOTE
• If the top edge of the original is not aligned with the back edge of the platen glass, prints
may not be made correctly, depending on the mode you have set.
• The scanning speed for horizontally placed originals is somewhat slower than for
vertically placed originals. You can place originals horizontally when scanning with Preset
Zoom mode, such as when enlarging LTR
• Horizontally placed STMT and LTR originals are referred to as STMT
• 11" ✕ 17" and LGL originals must be placed horizontally.
1-8 Placing Originals
Copies are stapled here.
Original
(face down)
Vertical placement
ABC
Original
(face up)
Vertical placement
Platen glass
Copies are stapled here.
Original (face down)
Horizontal placement
Feeder
Copies are stapled here.
ABC
Horizontal placement
to 11" ✕ 17"
Original
(face up)
.
and LTR .