Canon Image Runner 2000 Series Manual page 59

1
Place your original on the platen glass, enter the Special
Features menu © open the <FRAME ERASE FEATURE>
menu.
For details about the procedure above, see steps 1 to 3 of "Original Frame
Erase," on p. 2-9.
IMPORTANT
Do not place originals with binding holes in the feeder, as this may damage the
originals.
2
Press [
press [OK].
OK
3
Press [
[OK].
OK
NOTE
You can set the Hole Punch Erase mode only for the original sizes shown on the
display.
4
Press [
millimeters © press [OK].
OK
You can also use the numeric keys to enter the binding hole erase width.
When you press [OK], the standby display appears.
] to select <3.HOLE PUNCH ERASE> ©
] or [
] to select the size of the original © press
] or [
] or [ ] to select the binding hole erase width in
Frame Erase 2-13
2