Page Order (Collate) - Canon Image Runner 2000 Series Manual

I
If the Staple Mode Is Set:
The copies are automatically collated into sets arranged in page order and stapled. The
output is as follows:
Originals
Three Copies of Each Page
Collated in Page Order
1
2
3

Page Order (Collate)

This section explains the settings to perform each collation mode. The setting
differs depending on the mode, so follow the procedure below to make the required
setting for the desired collation mode.
1
Place your originals.
2
Finisher
Press [Finisher] repeatedly until the indicator for the Collate
Collate
mode lights.
Staple
NOTE
If <5.AUTO SORT> is set to 'ON', the Collate or Offset Collate mode is
automatically set when you place your originals in the feeder. (See "Auto Collate,"
on p. 3-8.)
G
If you want to set 'Rotate' Collation
I Set <6.SORT ROTATE> to 'ON' before making copies. (See "Rotate Collate,"
on p. 3-9.)
Proceed to step 3.
Set 1
4
Set 2 Set 3
Collating Copies 1-31
1