Mid Drive Exploded View; Mid Drive Shaft (6X6); Removal; Disassembly / Assembly - Polaris MS4000 Service And Owner's Manual

Mid Drive Exploded View

MID DRIVE AXLE
35 ft. lbs.
(47 Nm)
BUSHING
MID LOWER A-ARM

MID DRIVE SHAFT (6X6)

Removal

1. Repeat Steps 1-7 in the "Mid Drive Hub / Bearing Carrier
Removal" section.
2. Slide the middle axle out of the bearing carrier by pulling
the bearing carrier assembly outward and down.
35 ft. lbs.
(47 Nm)
35 ft. lbs.
(47 Nm)
SHAFT
35 ft. lbs.
(47 Nm)
BUSHING
SHAFT
MID UPPER A-ARM
SNAP RING
BUSHING
3. Pull the middle axle straight out from the frame. The axle
will slide off the mid gearcase splined output shaft.

Disassembly / Assembly

NOTE: For mid drive shaft service information, see
"REAR DRIVE SHAFT (4X4 CREW) - CV Joint / Boot
Replacement"
FINAL DRIVE
BEARING CARRIER
BEARING
HUB
7.27
7