Polaris MS4000 Service And Owner's Manual page 108

Unpacking the Kit
After unpacking the kit, inspect it for damage that may have occurred in transit. If it has been
damaged, do not install it. File a claim immediately with the carrier, stating the extent of
damage. Carefully check all envelopes, shipping labels, and tags before removing or destroying
them. Ensure that the parts listed in Table 1 are included in the package.
ES100, ES100-DEU, ES100-UNI (Kit Number 8567207)
Qty. Description
2
Mounting the Speaker
MOUNTING PRECAUTIONS: ES100 SERIES SPEAKER WIRES
To avoid reducing the sound output and damaging the speaker, ensure that the
speaker is mounted with the wires protruding from the bottom of the speaker.
MOUNTING PRECAUTIONS: DIRECTION OF SOUND OPENING
To avoid reduction of sound output, ensure that the speaker is mounted with the
sound opening facing directly in the direction intended to warn.
DRILLING PRECAUTIONS
Before drilling holes, check the area into which you plan to drill to ensure you do not
damage vehicle components while drilling. All drilled holes should be deburred and
all sharp edges should be smoothed. All wires going through drilled holes should be
protected by a grommet or convolute/split-loom tubing.
Select an appropriate mounting location that provides both adequate support and sufficient
clearance for the speaker assembly. In addition, the mounting location should provide
maximum signaling effectiveness while minimizing the sound reaching the vehicle's occupants.
The ES100 Series speakers are compact speakers intended to be mounted with a separately
purchased Federal Signal mounting system. If the speakers are installed with another mounting
system, the safety and effectiveness of the installation must be carefully evaluated. Refer to the
mounting instructions included with the speaker mounting system.
NOTE: Because of the variety of vehicles and possible mounting arrangements, installation
details and mounting bracket fabrication must be determined by the installer.
ES100, ES100-DEU, and ES100-UNI 100 Watt Speakers
Table 1: Kit contents
Side Mounting Bolt, 5/16-18, 5/8" Long
Part Number
7007010-10
108
3