Nortel Meridian 1 Description page 70

Page 70 of 104 M2616CT (Cordless Telephone)
553-3001-108 Standard 9.00 April 2000
Table 9
M2616CT Frequency Ranges
Channel/ Frequency
CH00 902.6
CH01 904.0
CH02 905.6
CH03 907.2
CH04 908.8
CH05 910.6
CH06 912.0
CH07 914.2
Range
Up to 20 M2616CT sets can be installed within a coverage area of
approximately 50,000 square feet. The typical range of the M2616CT base
unit to the cordless handset is between 125 feet to 150 feet. In open
environments, additional coverage may be achieved.
If a user steps out of range during an active call, the M2616CT simply places
the call on Hold, giving the user an opportunity to step back into range and
conveniently resume the call by pressing the DN (Directory Number) key.
Out-of-range indication on the handset display is also provided, whether the
user is on an active call or when the handset is idle.
Outside Plant
M2616CT is not intended for direct connection to the public switched
network or other outside plant networks. The interface in the M2616CT is not
suitable for direct connection to lines that exit the building, or connections to
non-approved telecommunications products. Exposed contacts at the base of
the M2616CT are directly connected to the line cord. Any foreign voltage
from the line cord can be exposed to these contacts without proper protection,
and may cause personal injury.
Channel/ Frequency
CH06 912.0
CH07 914.2
CH08 914.8
CH09 915.2
CH10 915.8
CH11 916.4
CH12 918.4
Channel/ Frequency
CH13 919.6
CH14 921.4
CH15 921.4
CH16 923.0
CH17 924.8
CH18 926.4
CH19 927.6