Display Module - Nortel Meridian 1 Description

Table 1
Hardware features and options
Analog Terminal
Adapter (ATA)
Brandline insert
Note: In this table, x indicates available features for the telephone type listed in the top row.

Display module

M2000 Series Meridian Digital Telephones
M2008/
M2006
M2008HF
x x
x x
Note: If the telephone is equipped with a Display, Meridian
Programmable Data Adapter, or Meridian Communications Adapter, the
number of programmable keys is reduced by one, as key 07 (key 05 on
M2006) automatically assumes the Program function.
For installation information, see Telephone and Attendant Console:
Installation (553-3001-215). See "Data options" on page 85 for more
information on the MPDA and MCA.
A two-line (24 characters per line) Display module provides system prompts,
feedback on active features, and valuable calling party information. In
addition, you can modify various telephone features such as volume and
screen contrast using the Program key (top right function key). You can
enable a Call Timer, which times calls made or received on the prime DN.
Note: The display module is not supported on the M2006.
The displays previously available (NT2K24WA, NT2K25YL, and others)
have been replaced by display NT2K28xx which eliminates a daughter board.
Two new screens have also been added to support ACD applications:
• Logged Out
• Not Ready
Note: It is possible to adjust the Display screen contrast so that it is too
light or too dark to read. If you cannot read the Display, disconnect and
then reconnect the line cord to return to the default settings.
M2616 M2016S
x
x
Meridian 1 Telephones Description and Specifications
Page 25 of 104
M2216
ACD-1
x
x x
M2216
ACD-2
x
x