M2000 Series Meridian Digital Telephone Relocation - Nortel Meridian 1 Description

M2000 Series Meridian Digital Telephone relocation

M2000 Series Meridian Digital Telephones
This section describes how to relocate an M2000 Series Meridian Digital
Telephone and its associated dataport Terminal Number (TN) without the
intervention of a craftsperson.
Modular Telephone Relocation is designed specifically for the M2000 Series
Meridian Digital Telephones and is an enhancement to Automatic Set
Relocation. If dataport TN information exists for the terminal, it is
automatically relocated when the telephone is relocated.
When a telephone is relocated-out, a relocation block is built to store the
relocation information in the protected data area. The relocation block
includes the old TN, the terminal ID information, the serial number of the
telephone, and other information.
This feature uses the unique serial number and terminal ID of the M2000
Series Meridian Digital Telephone to identify the terminal being relocated
and to reduce the number of manual steps needed for relocation.
See Automatic Set Relocation in X11 Features and Services (553-3001-306)
for complete details.
How to relocate an M2000 Series Meridian Digital Telephone
1 Go off-hook, receive dial tone, and enter Relocation Code (either SPRE
+81 or Flexible Feature Code).
2 Enter optional security code as defined in OVL 15 (a burst of tone
confirms that the telephone is relocated-out).
3 Take it to the new location and plug it in (a confirmation buzz from the
speaker indicates the telephone is in service).
Meridian 1 Telephones Description and Specifications
Page 29 of 104