Call Center
System Administration
M2616CT (Cordless Telephone) Battery
Handset Registration to Base Unit
Wall mounting the M2616CT
Specifications
Safety considerations
The Meridian M2616CT does not support ACD features, and therefore,
should not be programmed as a Call Center agent or supervisor.
To configure the M2616CT (Meridian Digital Cordless) set on the Meridian
1 system, refer to X11 Administration (553-3001-311), LD11.
For the Locator key (key 14) to function, do not assign a feature to this key.
Handsfree is required for the M2616CT to function properly.
The M2616CT handset uses rechargeable 700 mAh and 1000 mAh
Nickel-Cadmium batteries. Use only the battery identified or provided with
this product. It should be charged according to the instructions and limitations
specified in the M2616CT Cordless Telephone User Guide.
Each M2616CT handset is automatically registered to its respective base unit.
In cases where a substitute handset is required for troubleshooting purposes,
a different M2616CT handset can be reregistered by placing the handset
on-hook, and unplugging, then re-plugging in the AC power adapter and
telephone line cord.
The M2616Ct base is equipped with a reversible footstand that allows you to
mount the telephone on the wall. For complete details refer to the M2616CT
Cordless Telephone User Guide.
This section lists the specifications required for the M2616CT (Cordless
Telephone).
The following safety procedures should be followed.
M2616CT (Cordless Telephone)
Meridian 1 Telephones Description and Specifications
Page 67 of 104