Reference List; Functional Description - Nortel Meridian 1 Description

Page 12 of 104 M2000 Series Meridian Digital Telephones

Reference list

Functional description

553-3001-108 Standard 9.00 April 2000
• Power requirements 32
• Handsets 38
• Ordering information 39
The following are the references in this section:
• Digital Telephone Line Engineering (553-2201-180)
• Equipment Identification (553-3001-154)
• Telephone and Attendant Console: Installation (553-3001-215)
• X11 Features and Services (553-3001-306)
• X11 Administration (553-3001-311)
This chapter provides feature, add-on module, relocation, and specification
information for the M2006, M2008, M2008HF, M2616, M2016S, and
M2216ACD Meridian Digital Telephones.
This section provides feature and software requirement information for the
M2006, M2008, M2008HF, M2616, M2016S, and M2216ACD digital
telephones.
Note: There are three distinct versions of M2000 Series Meridian
Digital Telephones—all three are supported. The versions can be clearly
distinguished by the first four letters in the upper left-hand corner of the
model identification label on the bottom of the telephone. The three
versions are the "NTZK" models, the "NT2K" models with date code
prior to April 24, 1998; and the third version includes both the "NT9K"
models and the "NT2K" models with date code of April 24, 1998 and
later. In addition, the two jacks face in the same direction on "NT2K" and
"NT9K" telephones, and in opposite directions on "NTZK" telephones.
When appropriate, differences between the models are noted in this
document.