Nortel Meridian 1 Description page 36

Page 36 of 104 M2000 Series Meridian Digital Telephones
553-3001-108 Standard 9.00 April 2000
120 V transformer (AO367335 or equivalent) The following minimum
specifications must be met by this transformer:
Input voltage
No load output voltage
Voltage at rated current
Rated load current
240 V transformer (AO367914 or equivalent) The following minimum
specifications have to be met by this transformer:
Input voltage
No load output voltage
Voltage at rated current
Rated load current
Note 1: You cannot wall mount the telephone over the wall jack when
using a transformer because of the size of the RJ-11 adapter. Hang it
above or to the side of the jack and run the line and power cords to it.
Note 2: The above-mentioned transformers can also used with outlets
identified as 110V or 220V.
Closet Power Supply
Closet power can be obtained from an AC transformer for loops of 100 ft.
(30 m) or less, or a DC transformer for loop lengths of 650 ft. (198 m) or less.
An equivalent power source can be used but must be UL listed to provide
isolation of outputs to the terminal. See Figure 8.
When using closet power, do not plug the modular connector into any
equipment (computer, modem, or LAN card) other than the M2000
Series Meridian Digital Telephone, as damage to equipment may
result.
120 V ac/60 Hz
29 V ac maximum
26.7 V ac minimum
700 mA
240 V ac/50 Hz
29 V ac maximum
26.7 V ac minimum
700 mA
CAUTION