Software Installation - Lancom 1711+ VPN Manual

Hide thumbs Also See for 1711+ VPN:
Table of Contents

Advertisement

(LANCOM 821+ and LANCOM 1721+ VPN) or
of the router and the other end into an ISDN/S
point-to-point mode connection.
Configuration port – you may optionally connect the router directly to
the serial port (RS-232, V.24) of a PC. Use the cable supplied for this pur-
pose. Connect the configuration port of the LANCOM
and LANCOM 1721+ VPN) or
port of the PC.
Alternatively you may connect an external modem (analogue or GSM) to
the serial port using the LANCOM modem adapter kit, if you would like to
make use of an additional WAN line for remote maintenance, backup con-
nections or dynamic VPN.
Connect to power – Connect socket
using the included power adapter.
Use the supplied power supply unit only! Using an unsuitable power
supply unit may cause damage or injury.
Operational? – After a short device self-test the Power LED will be per-
manently lit. Green LAN LEDs indicate the LAN sockets that have function-
ing connections.
Devices with integrated ADSL modem could become quite warm dur-
ing their operation. Concerning these models, please pay attention to
the ambient air temperature range of max. 35°C. Make sure that the
ventilation is sufficient. Do not stack the devices and do not expose
them to direct insolation!
2.5

Software installation

The following section describes the installation of the Windows-compatible
system software LANtools, as supplied.
You may skip this section if you use your LANCOM VPN Router exclu-
sively with computers running operating systems other than Win-
dows.
LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721+ VPN
²
(LANCOM 1711+ VPN) with a free serial
Chapter 2: Installation
´
(LANCOM 1711+ VPN)
multi-device mode or
0
´
(LANCOM 821+
of the unit to a power supply
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

821+1721+ vpn

Table of Contents