16
AirLancer MC-54
1 Cardbus receptacle
2 LEDs for sending and receiving status:
3 Integrated antenna
2.4
Installation
The installation of AirLancer MC-54 takes place in four steps:
a Check the system preconditions
b Put the AirLancer MC-54 into your PC
c Driver installation
d Setting up for accessing the Wireless LAN – you will find the instruction
2.4.1
Checking the system preconditions
You should check before installing, whether your device fulfills all necessary
system preconditions:
•
•
|
|
AirLancer
|
2
3
Off – no radio activity
•
Blinking alternately – searching for base station
•
Blinking simultaneously – sending or receiving of radio data
•
Flickering – card is in power save mode
•
for this configuration step in chapter 4 'The AirLancer Client Manager' on
page 23.
PC with a free PC card interface (Cardbus, type II or type III), 300 MHz pro-
cessor or faster, at least 32 MByte RAM.
CD ROM drive
1