Lancom 1711+ VPN Manual page 17

LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721+ VPN
Chapter 2: Installation
Top
The two top-mounted LEDs enable the main function status to be assessed
even if the device is positioned vertically.
³
Power This LED indicates that the device is operational. After the device has been
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
off
green
green
red/
green
red

16
Power
Online
blinking
constantly on
blinking alternately
blinking
The power LED flashes red/green in alternation until a configuration
password has been specified. Without a configuration password, the
configuration data of the LANCOM is insecure. Under normal circum-
stances, you would assign a configuration password during the basic
configuration (see instructions in the following chapter). For informa-
tion about a later assignment of the configuration password see the
section "Security settings".
Device off
Self-test when powering up
Device ready for use
Device insecure: configuration password not assigned
Time or connect-charge reached