Instructions For Webconfig - Lancom 1711+ VPN Manual

Hide thumbs Also See for 1711+ VPN:

Manual (76 pages)

Table Of Contents

Table of Contents

If you cannot access an unconfigured LANCOM VPN Router, the prob-



lem may be the LAN netmask: In case there are less than 254 potential

hosts available (netmask >'255.255.255.0'), you must ensure that the

IP address 'x.x.x.254' is available in your subnet.

If you choose automatic TCP/IP configuration, you can continue with step

Give the LANCOM an address from the applicable IP address range. Con-

firm with Next.

In the window that follows, you first set the password to the configura-

tion. Entries are case sensitive and should be at least 6 characters long.

You also define whether the device can be configured from the local net-

work only, or if remote configuration via WAN (i.e.. from a remote net-

work) is to be permitted.

Be aware that releasing this option also allows remote configuration



over the Internet. Whichever option you select, make sure that con-

figuration access is password protected.

Charge protection is a function which can place a limit on the costs from

WAN connections. Accept your entries with Next.

Close the configuration with Finish.

See the section 'TCP/IP settings for PC workstations' for information



on the settings that are required for computers in the LAN.

3.3