Throttle Body Assembly - Yamaha XT660Z 2008 Service Manual

THROTTLE BODY ASSEMBLY

Removing the throttle body assembly
Order
Seat
Fuel tank
Air filter case
Coolant
1 Fuel injector coupler
2 Throttle position sensor coupler
3 Throttle cable
4 Vacuum hose
5 Fast idle plunger outlet hose
6 Fast idle plunger inlet hose
7 Pilot air hose
8 Throttle body joint clamp screw
9 Throttle body assembly
Job/Parts to remove
THROTTLE BODY ASSEMBLY
Q'ty
Refer to "GENERAL CHASSIS" on page
4-1.
Refer to "FUEL TANK" on page 7-1.
Refer to "AIR FILTER CASE" on page 4-5.
Drain.
Refer to "CHANGING THE COOLANT"
on page 3-16.
1 Disconnect.
1 Disconnect.
2 Disconnect.
Refer to "INSTALLING THE THROTTLE
BODY ASSEMBLY" on page 7-7.
1 Disconnect.
1 Disconnect.
1
1
2 Loosen.
1 Refer to "INSTALLING THE THROTTLE
BODY ASSEMBLY" on page 7-7.
7-4
Remarks