Yamaha XT660Z 2008 Service Manual page 13

Tripmeter and tachometer modes
1. "SELECT" button
2. "RESET" button
Pushing the "SELECT" button switches the dis-
play between the tripmeter modes "TRIP 1" and
"TRIP 2" in the following order:
TRIP 1 TRIP 2 TRIP 1
6 6
When the fuel amount in the fuel tank decreas-
es to 6.7 L (1.77 US gal) (1.47 Imp.gal), the bot-
tom segment of the fuel meter will start flashing,
and the tripmeter display will automatically
change to the fuel reserve tripmeter mode "F-
TRIP" and start counting the distance traveled
from that point. In that case, pushing the "SE-
LECT" button switches the display between the
various tripmeter modes in the following order:
F-TRIP TRIP 1 TRIP 2
6 6
To reset a tripmeter, select it by pushing the "SE-
LECT" button, and then push the "RESET" button
for at least four seconds. If you do not reset the fu-
el reserve tripmeter manually, it will reset itself au-
tomatically and the display will return to the prior
mode after refueling and traveling 5 km (3 mi).
F-TRIP
6
1-5
Clock mode
1. Clock
2. "SELECT" button
3. "RESET" button
NOTE:
The clock is displayed even when the key is
turned to "OFF".
To set the clock
1. Push the "SELECT" button for at least four
seconds.
2. When the hour digits start flashing, push the
"RESET" button to set the hours.
3. Push the "SELECT" button, and the minute
digits will start flashing.
4. Push the "RESET" button to set the minutes.
5. Push the "SELECT" button and then release
it to start the clock.
Fuel meter
1. Fuel meter
With the key in the "ON" position, the fuel meter
indicates the amount of fuel in the fuel tank.
When the key is turned to "ON", all of the display
segments of the fuel meter will appear one after
the other and then disappear in order to test the
electrical circuit. The display segments of the fu-
el meter disappear towards "E" (Empty) as the
fuel level decreases. When only one segment is
left near "E" (Empty), refuel as soon as possible.
FEATURES